Design House 519843 Manuale delle Istruzioni Scaricare il pdf

KIMBALL 1LT PENDANT

ASSEMBLY/INSTALLATION INSTRUCTIONS

WARNING: Risk of Fire. Min 75ºC supply conductors. Consult a qualied electrician to ensure correct

installation.

Turn off the main power at the circuit breaker before installing the xture, in order to prevent possible

shock.

#519843

Customer Service 1-800-558-8700

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualied electrician.

Remove the xture and the mounting package from the box and make sure that no parts are missing by

referencing the illustrations on the installation instructions.

Phillips screwdriver.

CAUTION

GENERAL

TOOLS REQUIRED

ASSEMBLY AND INSTALLATION

(CONT.)

Please read carefully and save these instructions, as you may need them at a later date.

Turn off the power at fuse or circuit breaker.

Turn on the power at fuse or circuit breaker.

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN.

JUNCTION BOX

MOUNTING SCREWS

WIRE NUTS

CROSS BAR

GROUND SCREW

BALL NUTS

STEMS

LAMP HOLDER

SHADE

FIXTURE SCREWS

#519863

1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the BALL NUTS

and the FIXTURE SCREWS. Attach the CROSS BAR to the JUNCTION BOX using (2) MOUNTING

SCREWS.

2. Install STEMS based on the desired length of the item, adding CEILING PLATE once nished.

3. Make wire connections with WIRE NUTS:

A - Connect the black wire from Fixture to the black supply wire.

B - Connect the white wire from Fixture to the white supply wire.

C - Attach the xture ground wire to the CROSS BAR with the green GROUND SCREW. Then

connect it to the supply ground wire with a WIRE NUT. Carefully tuck wires back into the JUNCTION

BOX.

4. Attach the CEILING PLATE to the CROSS BAR through SCREW HOLES as shown, and secure it

with BALL NUTS.

5. Attach the SHADE to the LAMP HOLDER and secure it with SOCKET RING.

6. Install BULB (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

SOCKET RING

BULB (not included)

SCREW HOLES

CEILING PLATE

Item # 519843 (KIMBALL 1LT PENDANT GAL)

Item # 519863 (KIMBALL 1LT PENDANT BRZ)

Sommario

Pagina 1 - ASSEMBLY AND INSTALLATION

KIMBALL 1LT PENDANT ASSEMBLY/INSTALLATION INSTRUCTIONSWARNING: Risk of Fire. Min 75ºC supply conductors. Consult a qualied electrician to ensure co

Commenti su questo manuale

Nessun commento

Design House 519843 Manuale delle Istruzioni

Navigare online o scaricare Manuale delle Istruzioni per no Design House 519843. Design House 519843 Instructions / Assembly Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi no Design House 519843